INSTALLATION INSTRUCTIONS FOR PART 99-7606Torx T-10 Driver • Small Flat Blade Screwdriver • Phillips Screwdriver 1-800-221-0932 www.metrao
8FINAL ASSEMBLYMake wiring connections using the EIA color code chart shown below and the instructions included with the headunit. Metra recommends ma
9NOTES99-7606
99-7606 INSTRUCTIONS1-800-221-0932 www.metraonline.comREV. 02/22/08 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION I
TABLE OF CONTENTS99-7606•Dash Disassembly- Nissan Titan 2006 -07...1, 2- Nissan Pathfinde
199-7606DASH DISASSEMBLYOFFABCDisconnect the negative battery terminal to prevent an accidentalshort circuit.1Unclip and remove entire panelincluding
299-7606DASH DISASSEMBLYUnclip and remove the Hazard Lightswitch assembly. (Figure D)6Remove (2) T10 Torx screws fromthe passenger air bag off lightas
399-7606PRE-KIT ASSEMBLYAttach the passenger air bag off lightassembly to the 99-7606 RadioHousing using the factory hardwareremoved in the dash disas
499-7606KIT ASSEMBLYSnap the pocket into the radio housing. (Figure C)3Slide the DIN cage into the RadioHousing and secure by bendingthe metal locking
599-7606KIT ASSEMBLYSnap the pocket into the radio hous-ing.(Figure D)4Slide the radio into the radioopening until the side clipsengage. (Figure B)2Sn
699-7606KIT ASSEMBLYSlide the Double DIN radio into theDouble DIN bracket/radio housingassembly and secure the radio to thekit using the screws suppl
799-7606KIT ASSEMBLYSnap the Double DIN trim-plate ontothe housing/radio assembly.(Figure C)4Snap the Double DIN brackets tothe inside edge of the rad
Kommentare zu diesen Handbüchern