Metra 99-7875 Spezifikationen

INSTALLATION INSTRUCTIONS FOR PART 99-7875/99-7875T99-7875/99-7875TAPPLICATIONSHonda Accord 2008-2010(For Non-Navigation models with Dual Zone Climate

NOTES899-7875/7875T

NOTES999-7875/99-7875T

99-7875/7875T INSTRUCTIONS1-800-221-0932 REV. 04/21/10 © COPYRIGHT 2008-2010 METRA ELECTRONICS CORPORATION INST99-7875 www.metraonline.com

99-7875/99-7875T DASH DISASSEMBLYHONDA ACCORD 2008-10 / CROSSTOUR 201011Unclip and remove the trim panel atthe left side of the factory radio.(Figure

99-7875/99-7875T DASH DISASSEMBLY2Remove (2) Phillips screws facing upon the bottom of the factory radio.(Figure H)9Unclip and remove the hazardswitch

99-7875/99-7875T KIT PREPARATIONPASSENGER AIRBAG31Secure the climate controls into theradio housing using the factory hard-ware from rear. (Figure

99-7875/99-7875T KIT ASSEMBLY4ABCDIN MOUNT RADIO PROVISION WITH POCKETSlide the DIN cage into the RadioHousing and secure by bending themetal locking

99-7875/7875T KIT ASSEMBLY5ABCISO MOUNT RADIO PROVISION WITH POCKETMount the ISO Brackets to the radiousing the screws supplied with theradio. (Figure

99-7875/99-7875T KIT ASSEMBLY6DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISIONCut and remove the center bar fromthe Radio Housing. (Figure A)1Snap the Dou

99-7875/99-7875T FINAL ASSEMBLYFINAL ASSEMBLY(A) Strip wire ends back 1/2"B) Twist ends togetherC) SolderD) TapeABCDLocate the factory wiring har